Inflate the floor first, then one of the side tubes, then the second one to 50%. Check the overall chamber positioning. Then inflate to 100% without exceeding 0.1 bar (1.5 psi).
DO NOT OVER-INFLATE!
Fully close all of the valves.
Install the 3 keels, unless using on a river containing little water.
In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid overinflation, which could damage the kayak.
Do not leave inflated in the sun: risk of overinflation.
In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber.
The floor can be uncovered by opening the Velcro fastenings.
Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch.
Example 2: the hole is located along a seam; visit the workshop of a DECATHLON store to repair or exchange the bladder.
Easy to disassemble and fold
New carry bag, backpack style for short distances.
Easy clip fins.
Dry and deflate the kayak by unscrewing the 3 "Boston" valves.
Fold the lateral tubes down onto the floor.
Roll, starting from the opposite side to the valves to remove the air.
Place the rolled-up kayak into the main compartment of the bag.
Close the zip and tighten using the compression strap.
Patented bow shape: the front and back ends provide good glide. The V-shaped front of the kayak enables smooth entry into the water.
Technical dimensions and weights.
Length: 300 cm
Width: 95 cm
FOLDED & BAGGED SIZE
Height: 62 cm
Width: 44 cm
Thickness: 27 cm
Weight: 11 kg
Maximum pressure: 0.1 bar (1.5 PSI)
Number of seats: 1 seat
Content: kayak, bag, repair kit, keel
PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
Spare parts are available for Itiwit kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.
Inflatable floor: reference 8390989
Left bladder: reference 834 43 83
Right bladder: reference 834 43 81
Directions for use.
We recommend that you practice with a buoyancy vest.