Hide Filters
Filters 0
Sort by :
Filters 0
16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
16" 1.70 to 2.20 Schrader Valve Inner Tube

BTWIN

8311088

16" 1.70 to 2.20 Schrader Valve Inner Tube

MYR13.00
Tax included
1 reviews
nobody of 1 recommends this product
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
  • 16" 1.70 to 2.20 Schrader Valve Inner Tube
16" 1.70 to 2.20 Schrader Valve Inner Tube
size :

Store Availability

This inner tube is suitable for 16" diameter tyres with 1.70 to 2.20 section with a 33mm Schrader valve.

BENEFITS

Compatibility

16", 1.70 to 2.20 cross section tyres

Waterproof

Optimised composition to ensure your inner tube has a good seal.

TECHNICAL INFORMATIONS

How to choose an inner tube

Check the information indicated on the sidewall of the tyre (diameter and width).
For example, 16 x 2.20 means that the tyre is 16 inches in diameter and 2.20 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-305 means a tyre that is 50mm wide and has an inner diameter of 305mm (approx. 16 x 2.00).

Removing an inner tube

Remove the old inner tube using B'Twin tyre levers

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.

Mounting the inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To avoid punctures from pinching and for best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.

Weight:

122g

Videos

Reviews

2/5 1 review
nobody of 1 recommends this product
16” x 1.70 - 2.20 Inner Tube arrives with 2 holes!
Roger (United Kingdom) Used for 2 to 8 weeks
I fitted and attempted to inflate the inner tube it did not hold pressure. I discovered a tiny pin prick puncture which I decided to repair. Re - inflating the tube I discovered a second tiny pin prick puncture another repair!!!
Why did I repair a new Inner Tube? Impatience! I wanted the job done.
Disappointing to say the least after I repaired the first puncture I took some photos these can be forwarded if required.
Cost of the Inner Tube was only £2.99 But it should still hold air.!
  • 1