Stainless Steel Insulated Hiking Bottle - 0.4 L, Metal

8172744

QUECHUA

Write the first review
Made for
Simple, solid and very insulating, the reliable top opens in a quarter turn, cup included / 0.4 litre.

Buy
     In-Store

view all stores

Advantages
IsothermalStarting temperature 95°C: 76°C after 6 hrs, 63° after 12 hrs, 48° after 24 hrs.
Ease of usePour out by partially unscrewing the cap. Beaker included. Stainless steel.
Easy maintenanceEasy to clean thanks to the screw top. Stainless steel inner wall.
DurabilityDouble stainless steel int. wall con.18/8 (304) with an air gap between the two.
Warranty5 Years
Technical Informations

1
Advice for optimising the performance of your isothermal bottle
Fill the flask with boiling water for 5 minutes. Then replace the water with your beverage. Close the flask. The fuller the bottle is, the better it is at keeping its contents hot or cold.
2
Functions
Partially unscrew the cap to easily pour the liquid and avoid fully opening the cap which reduces the isothermal performance. The included beaker screws onto the bottle making it easy to carry.
3
Maintenance advice
Wash by hand then rinse with clear water and let to dry with the cap open. The bottle may be placed in the dishwasher, however the cap and beaker may not be placed in the dishwasher.
4
First use
Rinse the entire product 3 times with clear water before using for the first time.
5
Materials and regulations
Our products and materials meet current food contact standards. They are Bisphenol A (BPA) free, in compliance with current French regulations.
6
Weight and dimensions
Volume: 0.4 litre Dimensions : Ø 7 cm x 22.4 cm Weight: 290 grams Available in : 0.4L / 0.7L / 1L / 1.5L
Characteristics
MaterialStainless steel

Volume0.4 litre

DimensionsØ 7 cm x 22.4 cm

Weight290 grams

Available in0.4L / 0.7L / 1L / 1.5L
Information / Concept / Technology
Composition
Bottle/Body : 100.0% Stainless steel 304 Cap : 75.0% Polypropylene (PP), Cap : 25.0% Stainless steel Joint/Gasket : 100.0% Silicon

Test Product
Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.

Stockage Tips
Wash and dry before storing. Store in a clean and dry place.
    Show results for