Insulated, Stainless Steel, Hiking Bottle, 0.7 L Metal

8172745

QUECHUA

Made for
Strong, simple and highly insulating, the reliable lid opens with a quarter turn, cup included / 0.7 litre.

Buy
     In-Store

view all stores

Advantages
IsothermalStarting temperature 95°C: 81°C after 6 hrs, 70° after 12 hrs, 55° after 24 hrs.
Ease of useAllows you to pour by partially unscrewing the lid.Cup included.Stainless steel.
Easy maintenanceEasy to clean thanks to the screw top. Stainless steel internal wall.
DurabilityDouble wall construction in 18/8(304) stainless steel w. an air gap btw. the two
Warranty5 Years
Technical Informations

1
Advice to optimise the performance of your insulated bottle.
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle. the fuller the bottle, the better it is at keeping its contents hot or cold.
2
Functions
By partially unscrewing the lid, you can pour the liquid easily, and avoid opening the bottle fully, which would reduce its thermal performance. The cup, which is included, screws onto the bottle to make it easy to carry.
3
Care instructions
Hand wash then rinse with clear water and leave to dry with the lid open. The bottle may go in the dishwasher, but avoid putting the lid and cup there.
4
First use
Rinse the entire product 3 times with clean water before first use.
5
Materials and regulations
Our products and materials comply with current food contact standards. They do not contain Bisphenol A (BPA) in accordance with current French legislation.
6
Weight and dimensions
Volume: 0.7 litre Measures: Ø 8.3 cm x 26.4 cm Weight: 450 grams Available in: 0.4 L/0.7 L/1 L/1.5 L
Characteristics
MaterialStainless steel

Volume0,7 litre

DimensionsØ 8.3 cm x 26.4 cm

Weight450 grams

Available in0.4L / 0.7L / 1L / 1.5L
Information / Concept / Technology
Composition
Bottle/Body : 100.0% Stainless steel Cap : 75.0% Polypropylene (PP), Cap : 25.0% Stainless steel Joint/Gasket : 100.0% Silicon

Test Product
Our insulating products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.

Stockage Tips
Wash and dry before storing. Store in a clean, dry place.

Reviews

Sort by:
Excellent flask.
Used for 2 to 8 weeks
First time out, it held 100% warmth for around 7hrs and then 50% warmth for the next 4hrs. So would really recommend this flask. And my lad dropped it a couple of times too and it held well
  • 1
Show results for