300 Tailgate 2/3-Bike Carrier

8342387

B'TWIN

Made for
A cycle carrier that is ready and easy to use. Make sure it is compatible with your car and your bikes!

This product is no longer in stock

Buy
     In-Store

view all stores

Advantages
Easy assembly / dismantlingWith adjustable straps. Quick folding for easy storage.
Impact protectionRubber pieces to protect the parts that touch the car
Compact designFolded: Width: 51 cm / 20 inches. Height: 75 cm / 29.5 inches.
Bike safety1 red strap for securing bikes together
Warranty2 Years
Technical Informations

1
Maximum number of bikes
2 to 3 bikes depending on the type of vehicle. See our user guide for more information about car models.
2
Maximum load capacity
45 kg.
3
Maximum weight per bike
15 kg.
4
Dimensions
Installed: Length: 75 cm / 29.5 inches Width: 51 cm / 20 inches Depth: 58 cm / 22.8 inches Folded: Length: 75 cm / 29.5 inches Width: 51 cm / 20 inches
5
Bike rack weight
5 kg
6
Bike compatibility
Use the frame adapter for bikes with a non-standard frame (women's, BMX, and downhill bikes).
7
Bike attachment
Two frame holders with a rubber strap for each bike + safety strap
8
Rear lights and number plate still visible with the bikes attached
Depends on the type of car. See our user guide for more information about car models.
9
Bikes lock on to the bike rack
No
10
Bike rack locks to the car
No
11
Boot access
No
Information / Concept / Technology
Composition
Structure : 100.0% Steel Rope : 100.0% Polyamide 6.6 (PA6.6) Handle : 100.0% Polyamide Foam : 100.0% Ethylene Vinyl Acetate (EVA) Main fabric : Top : 100.0% Thermoplastic polyurethane (TPU) Cap : 100.0% Polypropylene (PP)

Reviews

Sort by:
So annoyed
Used for 1 week or less
I was advised to buy this product by a member of staff, saying it would be fine for the two bikes I was buying (1x adult & 1x child) and for my car (Qashqai). Not only does it not actually fit my car, it doesn’t even fit my child’s bike on either (or mine very easily) as the frames don’t fit it properly. Spent over an hour trying to fit them on!!
Response of the brand
I'm sorry to read that you were given the incorrect information from the store. It depends which model you have. I've had a look at the compatibility chart and it seems that the 320 model is more suitable. Although I don't know the model year of your Qashquai.
Regarding the frame compatibility, you can rotate the blue clamps by 90 degrees to get an optimal fit especially on the seat tube part of the frame rather than using the top tube. For certain bikes, a cross bar adapater is required.
Please return the rack to your local store for a refund or an exchange if required.
Regards,
Peter, Cycling Manager, DECATHLON
It will damaged your paint work
Used for 1 week or less
It is good solid easy to put one (take about 20min). My bike is voodoo minestor it struggle to fit it between the bars. With little bit wigglyng it fit but touch up the car . It is not working for heavy bikes. My is about 15kg.
Response of the brand
Thank you for your comments regarding this rack. With modern MTB's with bars in excess of 720mm width, it is commonly advised that you turn them 90 degrees (using an allen key) so that they are parallel with your bike, this avoids any contact between the car and the bike. Particularly important with boot mounted racks. As a secondary note, the blue clamps on the rack can be adjusted and rotated to get the best fit for your bike. For example you can clamp it on your seat tube and the other under the downtube. Many possibilities.
If after all of the above you are not satisfied with your rack, please feel free to return it to us for an exchange with your receipt.
Regards,
Peter Lazarus, National Cycling Manager, DECATHLON
Time wasted!
Used for 1 week or less
I spent the best part of 2 hours fitting this to my car. Imagine my disappointment and frustration when I found that the Btwin Rockmaster 500 won't fit over the bars!! Surely it would be an idea to sell products that are compatible with your other products. I shall be returning this for a refund.
Response of the brand
I'm sorry to read that the rack does not fit your bike. This has not been fed back to us before for this model. You can resolve this by loosening and adjusting the clamps which secure the bike to the rack. You can then fit one clamp under the down or top tube by the headset and then the other can be angled at 90 degrees and clamp onto the seat tube (not seat post). This works fine and holds the bike securely in place. Same technique for small frame bikes or kids bikes for example.
Give this a go before returning it. If no joy, then of course bring it back.
Regards,
Peter Lazarus, National Cycling Manager, DECATHLON
Brilliant bike carrier
Used for 1 week or less
Really impressed with these. Half the price of a similar model at Halfords. Good clear instructions. Went round Scotland on a camping trip, with three bikes, lots of bumpy, hilly roads, cattle grids, passing places etc. Bikes didn’t budge an inch. Not a mark on the car after removal either. Can’t wait to go again. Brilliant!
  • 1
Show results for